Home | Guides | Software | Hardware | Discussions | Shop | Contact Me | Donate


MicroModem

- Important info!

MicroModem is now discontinued, and I will not be producing any more units for sale. All information on this page is historical and for reference purposes.

If you want a complete, pre-built unit, please have a look at OpenModem instead. It offers a much more powerful feature-set, is easier to use, and is the platform I will be developing in the future.

While I will not be producing more MicroModems or developing the firmware further, all resources for MicroModem, including software, schematics, build info and source-code will be kept available for existing installations, and for any users that still want to build their own MicroModems.

If you want to build your own AFSK1200 modem, MicroModem is still a very viable option, since it is easy to build, and very well documented. It is also incredibly stable, with many units in the field running for years at a time without issues.

What is it?

MicroModem is an open-source implementation of a 1200-baud AFSK / Bell 202 modem on the popular ATmega328p microprocessor. MicroModem can be used for things like ham radio APRS, AX.25, TCP/IP over SLIP, experimentation with mesh-networks, long-range wireless communication with sensors (Or friends! Or strangers!). It basically comes in two flavors: Prebuilt or DIY.

It is simple enough that, if you have some basic electronics experience, you can understand and build it yourself with a few components and an Arduino. You can also get a more advanced and prebuilt, fully tested MicroModem directly from me. I manufacture them personally, to the highest quality.

Please note that the resources listed here for building your own MicroModem are for an earlier, more simple version, than the one I currently offer for sale. While the two modems are functionally identical, the version I offer for sale has some technical refinements, and is implemented as an integrated board with MCU, USB and everything on one board, measuring only 3x5 cm.

Can I buy it?

Yes! If you don't feel like building it yourself, I sell a completed version flashed with the firmware of your choice, fully tested and ready to go. Just visit my shop and browse through the options! Buying the modem from me helps me fund continued development of the firmware and hardware.

Resources

Firmware downloads

There's currently several different pre-compiled firmwares available for MicroModem. Take your pick, download, flash and enjoy! If you have the old version of the hardware, select the 5V reference build of your chosen version. If you have the new hardware version (greater than 2.0 printed on the PCB), select the 3.3V reference build.

You can flash the firmware with avrdude or similar programs. Using avrdude, the command would look something like:

avrdude -p m328p -c arduino -P /dev/ttyUSB0 -b 115200 -U flash:w:MicroAPRS.hex

If you use Windows, and want a GUI flashing program, you might want to take a look at XLoader.

Specifications

Here's a list of specifications for the version I offer for sale. If you have any other questions regarding specs, just send me an email, or ask in a comment on this page.

How do I build it myself?

If you want to build MicroModem yourself, you should have a look at the GitHub repository for MicroModem. It contains all the source-code, schematics, PCB layout, documentation and everything you need to get started. If you're not familiar with GitHub and just want to get going, here's the basic resources:

The general-purpose firmware

The MicroModemGP firmware is ideal if you want to build your own applications running over radio, or just want to experiment. It lets you send packets over almost any radio with up to 792 bytes of data per packet. This means you can also use SLIP to use the modem as an TCP/IP interface. The MicroModemGP firmware features forward error correction (12,8-hamming code), 12-byte interleaving, and CRC checksumming on all packets. It should be easy to expand the protocol to support addressing and routing, encryption, or whatever you find useful. If you have a cool idea but aren’t sure how to go about it, let me know and I will try and help! The protocol was written as an example of how to implement a basic protocol with error correction.

Don’t expect live video-streaming and rocking out to DI.fm over this though. This is only 1.2 kilobits per second. Loading Hackaday Retro took around 15 minutes when I tried. If you’re not using TCP/IP you will have better throughput than that though. But TCP/IP works fine for very simple synchroneous-style connections (like: connect to server -> send request -> wait for response -> send another request -> receive another response -> disconnect). Anything complicated, and you will get a lot of packet loss!

Other Notes

I designed MicroModem to be as simple an introduction to digital wireless communication as possible, while still being very flexible and functional. Micromodem will let you learn the basics in how to build digital wireless systems from scratch, and also offer an interesting platform to build further projects on. I hope you will find it educational and useful!

The source code for the modem firmware is very heavily commented, and should be easy to understand. In fact there is more comments than actual code most places. Some of the concepts can be a little daunting just from looking at the code, but it is actually all quite simple, when taken one step at a time. If you have any questions, drop me a comment here and I will try to help out.

Connecting to a Radio

You will need to connect the Audio In port of the modem to the speaker output of your radio, and the Audio Out port of the modem to the input of your radio. Most handheld radios will need microphone level audio on the input port, otherwise the transmitted audio will distort, making packets hard to decode. You should also also connect GND from your radio (usually the GND pin of the speaker jack) to the GND port of the modem.

The PTT circuit works by closing a switch (using a MOSFET) between the PTT+ and PTT_GND pins. Most Kenwood-style handhelds will have +3v on the ground pin of the MIC jack, that will trigger PTT when connected to the ground pin on the SPK jack. The PTT connector supplies a logic-level PTT signal. If you can trigger your radios PTT like this, use this connector instead.